PAID Raster maps (VIC, QLD, NSW, WA topo and Westprint maps)

Requirements:
- 3DX unit
- Active internet connection (for initial activation only)

1. Download the maps (whichever zones you require) and extract then using any decompression software (such as winzip, 7zip etc)
2. Create a new folder named "raster" in the root directory of your SD card

3. Transfer the map files to your newly created raster folder on SD card and make sure all the files in the folder are ".amr" file format.
4. Please ensure that your 3DX is connected to an active internet connection
5. Using the supplied pin (in white bag provided in 3DX packaging) – insert and press into the hole in the lower left  edge of the unit.                                               
6. Carefully remove the SD card tray and insert the SD card as shown


7. Reinsert the SD card drawer back into your unit, taking note that the card is  inserted upside down on the bottom side of the drawer.

8. Restart the 3D maps app and the following screen should appear (go to step 9 if the screen doesn't appear otherwise go to step 11)

9. Press the menu button on bottom left side of the screen
10. Go to Raster maps
11. Select "Activate" maps (Activation process requires active internet connection)
12. Enter the code you received to activate them
13. After activation, all your raster maps will be shown under raster maps in the menu

 

 

Free Raster maps (iTopo zone maps)

1. Download the maps (whichever zones you require) and extract then using any decompression software (such as winzip, 7zip etc)
2. Create a new folder named "raster" in the root directory of your SD card
3. Transfer the map files to your newly created raster folder on SD card and make sure all the files in the folder are ".amr" file format.
4. Insert the SD card in VMS 3DX unit
5. Go to 3D maps and press the menu button on bottom left side of the screen
6. Go to Raster maps and all your iTopo maps will be showing there

Â