New Day time map colour scheme
We have just released a new daytime map colour scheme for our 3D maps to make the overall feel more vibrant and crisp to allow for a better navigation experience.
3DX Wireless Reversing Camera (WiFi): All you need to know
This camera is designed to work with our flagship portable offroad GPS unit - 3DX. This product uses WiFi technology to establish a connection with the 3DX unit, and show you the view from the camera in real time. This helps the user to be aware of their surroundings, such as walls, other vehicles and obstructions, uneven terrain etc while reversing their vehicle or even standing still in one place. Installation Instructions Recommended wire connection are as follows: Power Wire (Red) : Accessory or battery power Trigger Wire (Yellow) : Reversing light Ground wire (Black) : Needs to be grounded Please note: Any variations in wiring connections would lead to camera not working as smoothly. VMS recommends that this device is installed professionally by a qualified auto-electrician. VMS is not liable for any damage caused as a result of the installation. Camera mounting considerations: Test the camera positioning before permanently mounting it on the surface. The higher the camera is positioned, the better the viewing angle. Initial Set-up Update your unit to the latest software (please note if you are on the latest version then you will have a reversing camera icon on your home screen) Once the camera is installed in you car, power up your car so that WiFi camera gets power Go to Settings > Network & Internet > WiFi Turn on your WiFi , if it is not on Select WiFi named "W-CarXXXXXXX" (X represents random numbers) Enter password 12345678 Once connected, try putting your car in reverse gear if your camera's trigger wire is connected to reverse light, alternatively press on reversing camera icon on the home screen. Usage Instructions WiFi camera's power wire is connected to the accessory power (it's always on) and trigger wire connected to revering light (Recommended set-up). Turn on your vehicle to power up the WiFi camera Shift the vehicle in reverse gear to trigger the camera application The camera view will automatically load up on the screen (Provided the screen was on and initial set-up is done) Alternatively, if you want to access the camera's view without shifting the vehicle in reverse gear, press on WiFi cam icon on the main menu In case, your camera's power wire is not connected as recommended and both power and trigger wires (red and yellow) are connected to reverse light Turn on your vehicle and shift it in reverse gear to power up the WiFi camera Go to WiFi settings and select W-car WiFi Immediately the camera feed would show up on your screen Once, you shift your car in drive or in any other gear, press the home button (Circle in the bottom middle of the screen) to get out of the camera feed screen to get back to start navigation. Recommendations / Points to be noted To optimise the WiFi connection between 3DX and the WiFi camera, it is recommended that the 3DX WiFi connection is set up to only connect to the camera's WiFi connection. Post installation, it is essential to note that the device uses WiFi technology for its connection and connection strength may vary depending on the distance and obstructions between the 3DX unit and the WiFi camera. This device is designed specifically for vehicle use and performance with camper trailers/caravans may vary VMS recommends that this device is installed professionally by a qualified auto-electrician. VMS is not liable for any damage caused as a result of the installation.
June 2022 3DX Update
It is always exciting to get an update for your device and testing out the new features. Here's a list of new features and fixes we have introduced in this update.
Top 10 things to do when you first get your 3DX
Just got your your new VMS 3DX, here are top 10 things that you should do to make sure you unlock the full potential of the device.